Vecta V240-LV Black

Part of Monitor Audio's Vecta interior/exterior range of architectural loudspeakers, the V240-LV adds further versatility in commercial applications with a 70/100V line level. Its integrated transformer allows multiple speakers in a system without worrying about impedance matching or losses, when long cable runs are required.

The V240-LV can be simply installed in places where other speaker choices would prove impractical. In both domestic and commercial locations, the speaker can be wall-mounted (horizontally or vertically) and discreetly installed under eaves or corner.

With an IP55 rating, the V240-LV is designed to withstand extreme environmental exposure and to deliver incredible audio quality for a lifetime. The compact form factor and unique design aesthetics ensure the speaker blends seamlessly into the background, providing architects and installers with a fresh choice for discreet internal and external audio applications.

Driver and System design

The dual 4" C-CAM metal cone drivers have been developed to be placed on a curved baffle and to deliver a controlled sound field that minimises ceiling or wall reflections, when mounted under eaves or in a corner. The centrally mounted C-CAM tweeter ensures dispersion at the crossover point matches the mid-range, providing smooth off-axis frequency response. The fully sealed box cabinet is resistant to air noise and the ingress of water and dirt.

Fitting

Once the bespoke bracket is installed and connected, the speaker simply drops into position and is secured with a single screw. This gives a precise electrical connection automatically and with no visible wires. The intelligent design makes it easier to install the speaker in the most difficult locations.

Technical Specification

System Format 2-way (3 driver)

Frequency Response (-6 dB) 70 Hz - 25 kHz

Sensitivity (1W@1M) 88 dB

Nominal Impedance 70/100 Volt line level

Minimum Impedance N/A

Switch 70 V (2, 4, 8, 16, 32) power level

Maximum SPL 108 dBA (each)

Power Handling (RMS) 100 W

Recommended Amplifier Requirements 25 - 100 W

Bass Alignment Sealed cabinet

Crossover Frequency 2.5 kHz

Connection Gold plated push terminals - attached to bracket

Environmental Protection Rating IP55 -25° to 65° C

Bracket Pivot Angle Wall: 25 degrees. Wedge: Additional 32.5. Total Max: 45.

4-point cluster bracket - vertical.

Drive Unit Complement 2 x 4" Drivers featuring C-CAM metal cone technology

25 mm (1") C-CAM dome tweeter

Dimensions (H x W x D) 335.9 x 243.2 x 150 mm (13 1/4 x 9 9/16 x 5 7/8")

Weight 3.56 kg (7 lb 14 oz)

Finishes Black or White (Signal White, RAL 9003)